adjusting draw length on bowtech assassin

Brad Allison April 12, 2022 assassin , length , on Comment

Draw length is 285. -Locate manual and locate the proper draw length setting if needed-Match correct draw length number or setting number with indexing post indicatorWatch the.

Pin On Hunting

Couple this with the infinite draw stop adjustment feature and you can adjust the draw length to your precise preference.

. Located in eastern Montana. 30 inch draw length. Bow can be adjusted from 26-30 draw length and 40-70lb draw weight.

The binary cams rotate in perfect synchronization eliminating cam timing concerns. Draw weight is 70lbs. For example if an Invasion CPX was shipped with the indexing post in the 3 slot at 29 inches of draw length you would place it in the 5 slot for a 28 inch draw length.

This bow has a binary cam system with a rotating module which makes adjusting the draw length easy by rotating the module. Draw length specific cam bows use specific cams to deliver different draw lengths. Let off is 80.

The Bowtech Assassin SD compound bow features a single-piece. If you do not have a gradual hand however there are many nail stickers stamps or head on to your neighborhood nail salon to allow them to replicate it to suit your needs. By simply rotating the module clock-wise or counterclockwise your draw length can be adjusted in 12 inch increments.

The short draw length is ideal for smaller people and for shooting out of cover. Adjusting a compound bows draw length. You just undo 3 screws on the cam then rotate the mod to the specific draw length you want then put the screws back.

In this case the. If you have a bow that is not set at your draw length you have to make some adjustments. OverDrive binary cam system moDels.

Then do the other cam in the same way then last of all you need to adjust the draw stop which is one screw take out and stick in another hole on the camjob done. To shorten the draw length rotate the module so that the indexing post is placed in a higher numbered slot. Draw Length Specific Cams.

The Rotating Mod System makes this feature possible. Fast up to 333 FPS Cons. I use a bowtech reckoning and quest bows for examples but the Justo fits most bows with s.

No bow press needed. Have a right hand bow tech Assassin with a 7 pin spot hog sight octane quiver and QAD drop away rest. Draw Length is adjustable from 26-30 in 12 inch increments.

Hesitation before hitting the back wall. If you want to adjust the draw length remove the module screws rotate the module and put the screws back in. The Assassin also features the Hardcore Limbs which BowTech introduced in 2010.

Takes no more than five mins. No bow press is required. No bow press is needed.

Replace both module screws on. Bowtech draw length adjustment Youll need a gradual hand for this eye catching nail design however its oh-so worthwhile. In this video I go over setting sliding draw stops with the Justo.

The draw length of all current BowTech bows can be adjusted without draw length specific modules. The following procedures are ways depending on the compound bow to adjust a compound bows draw length. The Bowtech Assassin SD compound bow also comes with a very solid back wall.

Bowtech Draw Length Adjustment.

Adjusting The Draw Length Bowtech Assassin Archery Talk Forum

2013 Owner S Manual Bowtech Archery